Operation; Warming Up Feeding Bottles & Baby Food Jars; Cleaning - Medela B-Well Instructions For Use Manual

Important Safeguards
lll

Cleaning

• Failure to follow de-scaling instructions may cause irreparable damage to the product.
• Do not touch the hotplate in the Bottle Warmer. Danger of scalding!
• For further advice and recommendations on baby feeding, please consult your health care
professional.
• Always let the Bottle Warmer cool down completely before starting a new warming cycle.
• Waiting time for next use = 15 min.
• If the Bottle Warmer is switched on and not running a cycle, it will automatically turn off after
1 minute.
SAVE THIS INSTRUCTION MANUAL

Operation

IV
Warming up feeding bottles & baby food jars
1
2
3
8 EN
Place the appliance on a flat stable surface. Plug the power cord
into Bottle Warmer and into wall socket as well. Don't switch on
until water and bottles/food jar are in the appliance.
Fill the Bottle Warmer with the appropriate amount of water.
Breastmilk
Milk Water Milk
30 ml 120 ml 150 ml
80 ml 120 ml 200 ml
250 ml
Note: Measure with a Medela-Bottle the appropriate amount of water.
Using cool distilled or filtered water may reduce limescale build-up.
For other amounts of breastmilk, we recommend to choose the next
lower cycle for warming the milk, e.g. for 120 ml breastmilk choose:
Milk
Water
80 ml
120 ml
Place filled bottle or food jar, in the bottle lift (3) and both into the
warmer filled with water.
Baby Food
Water Food
240 ml < 150 g
240 ml > 150 g
240 ml
Water
120 ml
240 ml