Accessing The Sound Settings; Selecting Sound Options - Sony Grand Wega KDF-42E2000 Operating Instructions Manual

Accessing the Sound Settings

Press MENU..................
1.
Select
2. Settings...............
Highlight........................
3.
4. Press to select................
To highlight an option and to change settings, press V v B b.
Press to confirm the selection.
To exit the Sound, press
Selecting Sound
Options
z Sound Mode settings
are independent of
settings in the
Treble/Bass options.
z TruSurround XT
attempts to create the
same surround effect
produced by a
multichannel system
using the left and right
speakers.
62
Downloaded From TV-Manual.com Manuals
.
The Sound settings include the following options:
Option Description
Sound Dynamic
Mode
Standard
Custom
Reset Reset the following options to the default setting: Treble, Bass,
Balance, Steady Sound, Volume Offset and BBE.
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Balance
Adjust to emphasize left or right speaker balance.
Steady On
Sound
Off
Volume Adjust to increase or decrease the sound level of the current input
Offset (TV or video input) relative to other inputs.
Surround TruSurround
XT
Off
BBE Select to give sound more impact by compensating for phase effects
in speakers. Select from High, Low, and Off.
✍
The BBE option is not available (it is grayed out) if the
Sound Mode option is set to Dynamic or Standard. To
use BBE, set Sound Mode to Custom.
Antenna
Sound
Exit:
MENU
Custom settings
Sound Mode Custom
Reset
Treble 0
Bass 0
Balance 0
Steady Sound Off
Volume Offset 0
Surround Off
BBE Off
Select to enhance treble and bass.
Suitable for spoken dialog.
Flat setting.
Select to stabilize the volume across all programs
and commercials.
Select to turn off Steady Sound.
Select for surround sound (for stereo programs
only).
Normal stereo or mono reception.
Dynamic
Standard
Custom