Sound Settings - Sony KDS-50A2020 Operating Instructions Manual

Sound Settings

Antenna
Sound
Sound Mode Custom
Reset
Treble
0
Bass 0
0
Balance
Steady Sound Off
Volume Offset 0
Surround Off
BBE
Off
Option
Sound Mode
Reset
Treble
Bass
Balance
Steady Sound
Volume Offset
Surround
BBE
MTS
Enjoy stereo, bilingual
and mono programs
To display the Sound settings, see "Navigating Through Settings" (page 33).
Exit:
MENU
Description
Dynamic Select to enhance treble and bass.
Standard Suitable for spoken dialog.
Custom Flat setting. Allows you to store your preferred settings.
✍
You can set up a Sound Mode (Dynamic, Standard, Custom) independently for
the TV input and for each Video input (Video 1 to Video 7). Your Sound Mode
settings are automatically saved upon selection.
Resets the following options to default values: Treble
Volume Offset, Surround and BBE.
Adjust to increase or decrease higher-pitched sounds.
Adjust to increase or decrease lower-pitched sounds.
Adjust to emphasize left or right speaker balance.
On Select to stabilize the volume across all programs and commercials.
Off Select to turn off Steady Sound.
Adjust the volume level of the current input (TV or video input) relative to other inputs.
TruSurround XT Select for surround sound (for stereo programs only).
Off
Select for normal stereo or mono reception.
Select to give sound more impact by compensating for phase effects in speakers. Select
from High, Low and Off.
✍
BBE is available only when Sound Mode is set to Custom.
Stereo Select for stereo reception when viewing a program broadcast in
stereo.
Auto SAP
Select to automatically switch to second audio programs when a
signal is received. If no SAP signal is present, the TV remains in
Stereo mode.
Mono Select for mono reception. Use to reduce noise during weak stereo
broadcasts.
✍
MTS is available only for analog programs.
Using the Menus
,
Bass, Balance, Steady Sound,
(Continued)
37