Sony Grand Wega KDF-42E2000 Operating Instructions Manual page 17

Item
1 MENU
2
TV/VIDEO
3
– VOLUME +
4
– CHANNEL +
5 TIMER LED
6 LAMP LED
7 POWER
8 Infrared
Receiver
9 POWER
q; Speaker
Downloaded From TV-Manual.com Manuals
Description
Press to display MENU to activate the
activate the TV/VIDEO, – VOLUME + and – CHANNEL+ buttons.
Press to confirm the selection or setting.
Press repeatedly to cycle through the video equipment connected to the TV's video inputs.
Press to adjust the volume.
Press to scan through channels. To scan quickly through channels, press and hold either – or +.
When lit in orange, indicates one of the timers is set. When it is set, this LED will remain lit even if
the TV is turned off. For details, see page 72.
Flashes in red when the lamp for the light source has burned out. For details, see "Replacing the
Lamp" on page 76.
Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see contacting Sony information on page 2). When the red
LED blinks only three times, the lamp door of the lamp unit or the lamp itself is not securely
attached (see page 78).
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Press to turn on and off the TV.
Outputs the audio signal.
✍
The CHANNEL + button has a tactile dot. Use the tactile dot as a reference
when operating the TV.
B b v V
buttons. Press again to exit MENU to
, , , , and
17