Accessing The Video Settings; Selecting Video Options - Sony KDF-E42A10 Service Manual

Accessing the Video Settings

Press
WEGA GATE.......
1.
Select
2. Settings..............
Highlight......................
3.
Press to select...............
4.
To highlight an option and to change settings, press V v B b.
Press to confirm the selection.
To exit the Video, press
Selecting Video
Options
z To quickly and easily
change from one
Picture Mode to
another, use PICTURE
on the remote control.
.
The Video settings include the following options:
Option Description
Picture Vivid
Mode
Standard
Customized
Custom
picture
viewing
✍
You can alter the Video settings (Picture, Brightness,
Color, etc.) for each Mode and each video input.
✍
You may set up a "Mode" (Vivid, Standard, Custom)
independently for each Video input (Video 1-Video 6,
including the Antenna input). Your "Mode" settings
are automatically saved after each selection. This
allows you to customize the Mode setting for each
type of signal source.
Reset Select OK to reset all settings and adjustments to the default setting
(except for Advanced Video).
Iris Adjust the contrast levels.
Picture
Adjust to increase picture contrast and deepen the color or decrease
picture contrast and soften the color.
Brightness
Adjust to brighten or darken the picture.
Color Adjust to increase or decrease color intensity.
Hue Adjust to increase or decrease the green tones.
Antenna
Video
Custom settings
Picture Mode Vivid
Reset
Iris Max
Picture Max
Brightness 50
Color 65
Hue 0
Color Temp. Cool
Sharpness 50
Select for enhanced picture contrast and sharpness.
Select for standard picture settings. Recommended
for home entertainment.
Select to display a picture with minimum
enhancements.
Using the Settings
Vivid
Standard
Custom
(Continued)
63