Using the Menus
Enjoy stereo, bilingual
and mono programs
To display the Sound settings, see "Navigating Through Settings" (page 48).
Select to enhance treble and bass.
Suitable for spoken dialog.
Flat setting. Allows you to store your preferred settings.
You can set up a Sound Mode (Dynamic, Standard, Custom) independently for
the TV input and for each Video input (Video 1 to Video 8). Your Sound Mode
settings are automatically saved upon selection.
Resets the following options to default values: Treble
Volume Offset, Surround and BBE.
Adjust to increase or decrease higher-pitched sounds.
Adjust to increase or decrease lower-pitched sounds.
Adjust to emphasize left or right speaker balance.
Select to stabilize the volume across all programs and commercials.
Select to turn off Steady Sound.
Adjust the volume level of the current input (TV or video input) relative to other inputs.
Select for surround sound (for stereo programs only).
Select for normal stereo or mono reception.
Select to give sound more impact by compensating for phase effects in speakers. Select
from High, Low and Off.
BBE is available only when Sound Mode is set to Custom.
Select for stereo reception when viewing a program broadcast in
Select to automatically switch to second audio programs when a
signal is received. If no SAP signal is present, the TV remains in
Select for mono reception. Use to reduce noise during weak stereo
MTS is available only for analog programs. It is not available when you are
using Twin View.
Bass, Balance, Steady Sound,