Cable System
and/or VHF/UHF
Antenna System
JUMP
ANT
MODE
SURROUND
SOUND
PICTURE
ANT button
Downloaded From TV-Manual.com Manuals
Connecting a cable system and/or an external VHF/UHF antenna to the
VHF/UHF input and or CABLE will allow you to enjoy high definition and
standard definition digital programming (if available in your area) along
with the standard definition analog programming
✍
This TV is capable of receiving unscrambled digital programming
for both cable (QAM and 8VSB) and external VHF/UHF antenna
(ATSC).
ENT
FREEZE
WIDE
To switch between the VHF/UHF (antenna) input and the CABLE input,
press the ANT button on the remote control.
✍
Do not use an indoor antenna, which is especially susceptible to
radio noise.
75-ohm Coaxial cable
75-ohm Coaxial cable
Rear of TV
23