DM3001X Safety Information SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. b) Retain Instructions - The safety and operating instructions should be kept for future reference.
Careful attention to detail was provided in this unit. The DM3001X even has smooth edges to ensure your fingers don’t get caught up in the mix. We hope you enjoy the...
24. Power Switch – Actives mixer power. Always turn on input devices first, the mixer second, and amplifiers last! 25. Light Connector – for attaching a 12V BNC style gooseneck light. - The Leader in DJ Technology - 7 - DM3001X http://www.numark.com...
With phono selected the input signal is fed directly to the DM3001X phono pre-amplifiers so use this input only for turntables. Line level sources will overload the sensitive phono pre-amps. Switch this over to the AUX position for line devices such as CD players and Tape decks.
DM3001X QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power.
What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK products; including but not limited to DJ mixer, amplifiers, CD players, CD Mix Stations, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, cartridges, and all other accessories; are to be free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer for a period of (1) Year.
Need help?
Do you have a question about the DM3001X and is the answer not in the manual?
Questions and answers