When installing:
Ensure that you route the cables firmly and tape up in the proper positions.
Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
1140 Chassis assembly
For access, remove these FRUs in order:
•
"1010 Battery" on page 65
•
"1020 Bottom cover" on page 66
•
"1030 Storage drive" on page 66
•
"1060 Keyboard" on page 73
•
"1100 Keyboard bezel assembly" on page 81
•
"1120 Hinge caps" on page 86
•
"1130 LCD unit" on page 87
Removal steps of the chassis assembly
Step
Screw (quantity)
1
M2.5 × 5 mm, flat-head, nylon-coated (2)
2
M2 × 12 mm, flat-head, nylon-coated (1)
1
2
1
Color
Black
Black
Torque
0.181 Nm
(1.85 kgf-cm)
0.181 Nm
(1.85 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
89