InFocus in5316hd User Manual page 12

17.
USB
18.
DISPLAYPORT
19.
HDMI
20.
VGA2
21.
RJ45
22.
READY LED
23.
TEMP LED
24.
PWR LED
25.
POWER button
26.
VGA1
Note:
If your video equipment has various input sources, it is recommended to connect in priority of
HDMI, component, S-Video, Composite for better picture quality.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
Downloaded from ProjectorsManual.com Manuals
Connect the USB CABLE from a computer
(used for presentation slide control with the projector remote)
Connect a DISPLAYPORT CABLE to a DISPLAYPORT source
Connect the HDMI CABLE from an HDMI device
Connect the RGB CABLE from a computer or a video enabled device
Connect a LAN CABLE for networking purposes
Solid Red Normal operation
Flashing Red Lamp is not ready
Solid Red Overheating
Solid Red Standby
Solid Green Normal operation
Flashing
Green or LED error messages
Red
Turns the projector on or off (main power switch must
be turned on first).
Connect the RGB CABLE from a computer or a video enabled device
– 5 –
IN5316HD/IN5318 – User's Manual
44
12