Lindy 42449 Quick Installation Manual page 6

Quick Installation Guide
Changing the Admin ID and Password
By default settings, the Admin ID and Password are blank. For
security purpose, you are recommended to change the Admin ID and
Password immediately.
Click Wizard. The dialog box as
shown appears, asking you to enter
the Admin ID and Password. Both
fields are "blank".
Click
If required, select the Change
options and enter the new Admin ID
and Password.
Click
The settings of IP Address, Subnet
Mask and Default Gateway must
correspond with your camera and
networking settings. Please check
with your network administrator for
correct settings.
Click
The Connection Mode depends on
how your camera is connected to
your network. Click Infrastructure
for use with a router or Adhoc for
peer-to- peer. The Network
Name, Wireless Channel, and
Encryption Key MUST correspond
with your wireless network settings.
6