Permobil K450 Owner's Manual page 107

Permobil K450 Owner´s manual
3. Remove two Allen screws, as
shown in Picture 3. Lift off the back
cover.
4. The seat control modules are now
visible. There may be two or three
modules, depending on whether
seat tilt is included as an extra
option. The individual functions are
placed as shown in picture 4.
5. A cable from each function is
connected to a control module.
Remove the cable connected to the
module that you want to maneuver.
Picture 5 shows how the cable from
the adjustment device for the seat-
to-floor function has been removed
from the control module.
m
CAUTION
Take care when connecting the emergency
operation cable with the control module cable,
so that the pin of the male connector flushes
with the groove in the female connector, to avoid
any risk of damaging the cable contacts.
6. Connect the free end of the emer-
gency operation cable with the
cable from the adjustment device of
the function you want to maneuver,
see picture 6.
Emergency operation of seat functions
The Allen screws that attach the
Control modules behind the back
cover, and their respective functions.
Cables connected to control mod-
Connecting the emergency opera-
tion cable and the cable from the
adjustment device.
108
back cover.
seat tilt
Seat-to-floor function
Seat lift
ules.
Emergency
operation cable
3
4
5
6