Xoro HSD 2220 Operation Manual page 82

Symptom
No remote control
Language can not be
changed
Angle can not
changed
No key operation
Y Pb Pr activation
CVBS, S-Video and
SCART with distorted,
devided or no picture
picture
Forget the password
38
TROUBLESHOOTING
Correction
•
Check the batteries in the remote control
•
Are the polarities correct?
•
Batteries are depleted. Please uses new one.
•
Point the remote control unit at the Infrared sensor and
operate.
•
Remove the obstacles between the remote control and
the Infred snesor
•
Operate the remote control unit at a distance of not
more than 5 meters from the Infrared sensor.
•
There is only one language on the on the disc
recorded.
•
Choose in the Title menu of the Video DVD the
language which do you want.
be •
The angles may be recorded for only specific scences
and are not normally everytime available.
•
Turn the unit off and then back to on after a couple of
minutes.
•
Please connect the video cable properly.
•
Please pay attention to the colour coding of the cable.
•
Select in the setup settings the option YUV.
•
Change the source input on the TV set
•
You had press the P-Scan button during you uses the
CVBS, SCART or S-Video output. Press the P-SCAN
button again.
The master password is 1389. Please insert the password by
the Preference setup settings and the option Password