Page 1
HSD311PRO DVD PLAYER 46 47 PRODUCT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety characteristics. These safety characteristics often pass unnoticed and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.
Page 2
DVDP480 Note: There is different part in this manual as compared with a usual one because we use OEM factory¡¯s data. ¡ ° ¡ ¡ ¡ ° ¡ ± ± ° ¡ ± On Circuit description , Lubrication and Abbreviation of Logo , please refer to DV- 303 service manual Accessories Remote control unit...
Page 6
COMMOND89_1200_V1 MT1389E (LQFP256) DVD Demo Board for 1200 PUH INDEX & POWER, RESET RF, SERVO & MPEG MT1389E MEMORY - SDRAM, FLASH/EEPROM VIDEO OUT AUDIO DAC WMA8746&WMA8720 AND AUDIO OUT NAME TYPE DEVICE Digital 5V SUPPLY DV33 Digital 3.3V MT1389E RFV33 Servo 3.3V MT1389E...
HSD311PRO GBIP3.833.1065MX AMOUNT PART NO. DESCRIPTION GBIP2.855.671MX MAIN BOARD PORTION SHD-2502NBL DVD DRIVE GBIP8.070.050 DX24(B 0.5 250) 24P CABLE GBIP2.930.156MX POWER BOARD PORTION GBIP8.078.178 POWER BOARD SUPPORT GBIP8.912.014 SCREW GBIP4.123.465MX FRONT-PANNEL PORTION GBIP4.021.164MX CONTROL BOARD GBIP4.021.164BH CONTROL BOARD(RAW) GBIP4.021.164CJ CONTROL BOARD(RAW)
Trouble Shooting DVDP480 Trouble Analysis Form before opening player Trouble Reason Solution Signal lamp is not on when Power plug does not touch well. Insert plug into socket well or power is on. change a socket Read slowly or do not read disc, Insert disc correctly;...
Page 20
Trouble Shooting DVDP480 Frequent Trouble Analysis after Opening Player Analysis Trouble Solution Signal lamp is dark or not on, It maybe occur in power supply See power examination and when power is on. circuit. reparation procedure Picture is ok, but the sound is It maybe occur in audio See audio output examination too low or broken or noisy or...
Page 21
Trouble Shooting DVDP480 Examination & Reparation Procedure for Simulative Audio 4560-1: Left channel amplify output Start 4560-7: Right channel amplify output The connection between AV To test AV audio(L/R channel) output line and TV or amplifier output is ok or not? is wrong, or operation is wrong.
Page 22
Trouble Shooting DVDP480 Examination & Reparation for Remote Control Receive system Start To test the power feet of Ir1 receive head in front control board is ok or Examine and repair +5V power not with multimeters, feet 3 of IR1 supply circuit receive head is +5V, feet2 is ground, feet 1 is control code output...
Need help?
Do you have a question about the HSD311PRO and is the answer not in the manual?
Questions and answers