General Settings - Philips DVDR3510V User Manual

Setup Menu Options

General settings

Screen Saver
Country
Video Output
Selection
Restore Factory
Settings
54
DVDR3510V_eng_26244.indd 54 DVDR3510V_eng_26244.indd 54
Downloaded From Disc-Player.com Philips Manuals
(continued)
(underlined options are the factory default settings)
The screen saver prevents damage to the TV screen by avoiding
exposure to a static image for too long.
{ On } – Switches to TV screen saver mode when
{ Off } – Turns off the screen saver function.
Select the country of your area for auto channel tuning.
(See section "Step 3: Installation and Setup - Select the country of
your residence").
Select the type of video output that matches the video connection
between this recorder and your TV.
SCART RGB
{ } – For SCART connection.
YUV Interlaced
{
YUV Progressive
{
Note: Video output setting is not required for S-Video or Composite
(CVBS) video connection.
Restore all the settings of this recorder, except for the PIN code.
Restore Factory Settings can only be changed when there
is no disc in the disc tray.
1) Press OK to confi rm the default restore.
2) A warning message will appear. Select
proceed or
CANCEL
playback has been stopped or paused for
more than 15 minutes.
} – For component video connection.
} – For component video connection to
progressive scan TV.
to abort, then press OK to confi rm.
in the menu to
OK
2007-08-01 1:46:23 PM 2007-08-01 1:46:23 PM