Instant Time-Off Recording; Watching Disc Playback During Vcr Recording; Watching Another Source During Recording - Philips DVDR3510V User Manual

Instant time-off recording

This function allows you to make a
recording with a preset length easily
without using the timer programming.
A Press P +- to select the programme
number to record from, for example
'P01'.
B
Press DVD or VCR to select the
destination of recording.
C
Insert a recordable DVD or VHS tape
into the recorder.
For VHS tape, locate the start point
position for recording.
D
If necessary, press REC MODE
repeatedly to select another recording
mode.
E
Press REC z to start recording.
To increase recording time in 30 minute
increments, press REC z repeatedly.
F
The recorder will stop recording at the
designated end time and switch to
standby mode automatically.
If you wish to stop the recording before
the scheduled time, press STOP x.
Watching disc playback
during VCR recording
If you wish to watch the DVD playback
during the VCR recording, press DVD to
switch to DVD mode and perform the
DVD playback.
Note: This function is possible if the
{ Decoder } option is set to { Off }. See
the chapter "Setup Menu Options –
Channel Setup Settings – { Modify
Channel Information }".
TIPS: Ensure that there is suffi cient space available on the recordable DVD or VHS tape before
DVDR3510V_eng_26244.indd 29 DVDR3510V_eng_26244.indd 29
Downloaded From Disc-Player.com Philips Manuals
recording. You have to fi nalise the DVD±R before it can be playback on other players.
Recording
Watching another source
during recording
During recording, watch another TV
channel or playback from another audio/
video device which is connected to this
recorder.
SCART SCART
Watching playback from another
device
This is only possible if the recorder is
connected to the TV using the EXT1 TO
TV-I/O socket.
Press SCART to view the picture from
the device which is connected to the
EXT2 AUX-I/O socket of this DVD
recorder.
Watching another TV channel
If there is no device connected to the
EXT2 AUX-I/O socket, press SCART to
switch to TV mode.
Use the TV's remote control to change
the channels.
The message "TV/LOOP" will be
displayed on the recorder's system
display panel.
To switch back to recorder mode, press
SCART on the remote control.
Helpful Hint:
– If you want to watch the TV channel
through the recorder or playback the
recorded disc, switch the TV back to its video
input channel.
(continued)
29
2007-08-01 1:46:18 PM 2007-08-01 1:46:18 PM