General Settings - Philips DVDR3350H User Manual

GENERAL settings

Auto Program
SETUP MENU - GENERAL
Auto Chapter Marker
Record Quality
Auto Program
Manual Program
Manual Program
Manual Program
Program Number
P001
Name C h 0 0 1
Frequency
0 5 8 . 9 8 Mhz
Fine Tuning
Skip No
OK
OK OK CANCEL
TIPS: Press to go access the options of an item in the menu.
Press SETUP to exit the menu.
1_dvdr3350H-55_eng_18671.indd 25 1_dvdr3350H-55_eng_18671.indd 25
Step 3: Installation and Setup
(underlined options are the factory default settings)
Select to make automatic TV channel programming.
A
Use keys to highlight { Auto Program - Search } and
press .
5min.
SP
A warning message will appear. Select
Search
the remote control.
Edit
B
Use keys to highlight { Tuner Input Source } and press
to access the options:
{ Cable }
{ Air }
C
Use keys to highlight
The automatic TV channel search will start. This process may take
several minutes. Once complete, the total number of channels found will
appear on the TV.
Select to modify your preset TV channels.
A
Use keys to highlight { Manual Program - Edit } and
press .
The modify channel options will be displayed.
B
Use keys to one of the options and press
{
Program Number } – Use CH+/ CH– to select by the program
{ Name }
{ Frequency } – Select this to adjust the frequency of the channel.
{ Fine tuning } – Select this to fi ne-tune the TV channel manually if the
{ Skip }
C
To confi rm all the changes, select
remote control exit to the previous screen.
– Select this if the recorder is connected via a cable box/
satellite receiver.
– Select this if the recorder is connected directly to the
antenna wall outlet.
and press OK.
CONTINUE OK
number for modifying.
Use
– CH+/ CH– keys to select by the channel name
for modifying.
– Use keys to adjust the frequency. Press OK on
the remote control to confirm the setting.
reception is poor.
– Use keys to fi ne-tune the frequency.
– Select this to set the channel to be skipped. The
skipped channels can only be accessed by pressing
the corresponding number button on the remote
control.
– Use keys to select { Yes } if you wish to skip
this channel.
OK
OK
(continued)
and press OK on
OK OK
.
and press OK on the
2005-12-08 10:10:17 AM 2005-12-08 10:10:17 AM
25