Connecting The Video Cables - Philips DVDR3510V User Manual

Step 1: Basic Recorder Connections
Option 1

Connecting the video cables

This connection enables you to view the
disc and VHS tape playback from the
recorder. You only need to choose one
of the options below to make your video
connection.
Option 1: Using a SCART cable
Connect a SCART cable (not supplied)
from the EXT1 TO TV-I/O socket on
the recorder to the corresponding
SCART input socket on the TV.
Helpful Hints:
– If your TV has several SCART sockets,
select the SCART socket that is suitable for
both video output and video input.
– If your TV displays a selection for the
SCART socket, select 'VCR' as the source for
the SCART socket.
– The EXT2 AUX-I/O socket is intended
only for additional devices.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
16
DVDR3510V_eng_26244.indd 16 DVDR3510V_eng_26244.indd 16
Downloaded From Disc-Player.com Philips Manuals
ANTENNA
2
EXT AUX - I/O
EXT 1 TO TV - I/O
TV
OR
from the power outlet.
VIDEO
(CVBS) Y
S-VIDEO
(Y/C)
L P
B
AUDIO
R P
R
COMPONENT
AUDIO / VIDEO OUT AUDIO OUT VIDEO OUT
OR
Option 3
Option 2
TV
Option 2: Using an S-Video cable
Connect an S-video cable (not supplied)
from the S-VIDEO (Y/C) socket on the
recorder to the S-Video input socket (or
labelled as Y/C or S-VHS) on the TV.
Audio connection is required in order
to hear the sound, see next section
"Connecting the audio cables".
Option 3: Using a Video (CVBS)
cable
Connect a composite video cable (yellow
end - not supplied) from the VIDEO
(CVBS) OUT socket on the recorder
to the video input socket (or labelled as
A/V In, Video In, Composite or
Baseband) on the TV.
Audio connection is required in order
to hear the sound, see next section
"Connecting the audio cables".
(continued)
3139 241 26501
COAXIAL
DIGITAL AUDIO OUT
2007-08-01 1:46:16 PM 2007-08-01 1:46:16 PM