Connecting The Video Cables - Philips DVDR3380 User Manual

Step 1: Basic Recorder Connections
Option 1

Connecting the video cables

This connection enables you to view the
disc playback from the recorder. You only
need to choose one of the options below
to make your video connection.
Option 1: Using Video (CVBS) jack
Use the supplied audio/video cable
(yellow plug) to connect the VIDEO
(CVBS)-OUTPUT jack on the
recorder to the video input jack (or
labeled as A/V In, Video In or Composite)
on the TV.
Option 2: Using an S-Video cable
Use an S-video cable (not supplied) to
connect the S-VIDEO (Y/C) -
OUTPUT jack on the recorder to the
S-Video input jack (or labeled as Y/C or
S-VHS) on the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
OR
OR
Option 2
Option 3: Using a Component
(Y Pb Pr) cable
A
Use the component video cable (red/
blue/green - not supplied) to connect the
Y P
recorder to the corresponding
component video input jacks (or labeled
as Y Pb/Cb Pr/Cr or YUV) on the TV.
B
If your TV accepts Progressive Scan
signal, see the chapter "DVD System
Menu Options – GENERAL Settings" for
detailed Progressive Scan set-up.
IMPORTANT!
The progressive scan video quality is
only available through a Y P
connection and a progressive TV is
required. It is strongly advised to
complete the recorder installation
fi rst, before enabling the progressive
scan feature.
Note: Audio connection is required in
order to hear the sound, see next section
"Connecting the audio cables".
(continued)
Option 3
P -OUTPUT jacks on the
B R
TV
S-V ID E O
IN
AU D IO
O U T
V ID E O IN
P
B R
13