Connecting The Video/Audio Cables - Philips DVDR5520H User Manual

Step 1: Basic Recorder Connections
ANTENNA INTERCONNECT CABLE
(OPTIONAL, REFER TO MANUAL)
TO TV EXT
G-LINK
TO TV ANTENNA ANALOG
INPUT ANTENNA INPUT
Option 1
TV
Connecting the video/audio
cables
This connection enables you to view the
playback from this recorder. You only
need to choose one of the options
below to make your video connection.
– For a standard TV, follow option 1, 2
or 3.
– For a progressive scan TV, follow
option 4.
– For a HDMI TV, follow option 5.
Helpful Hint:
– Audio connection is only required if you
are connecting this recorder to your TV using
the S-VIDEO, CVBS or COMPONENT VIDEO
socket.
Option 1: Using the Scart socket
Connect a scart cable (supplied) from the
EXT1-TO TV socket on the recorder
to the corresponding SCART socket on
the TV.
Helpful Hint:
– Use the EXT2-TO VCR/SAT socket for
connecting the recorder to additional device.
18
DIGITAL
HDMI
ANTENNA INPUT
OUT
DIGITAL ANTENNA
LOOP THROUGH
CVBS-OUT
L
1 TO VCR/SAT EXT 2
R
AUDIO
S-VIDEO
OUT
OUT
ANTENNA INTERCONNECT CABLE
DIGITAL ANTENNA
LOOP THROUGH
(OPTIONAL, REFER TO MANUAL)
Y
TO TV EXT 1 TO VCR/SAT
CO
DIGI
Option 3
Option 2: Using the S-Video socket
A
Connect a S-video cable (not supplied)
from the S-VIDEO OUT socket on the
recorder to the S-Video input socket
(usually labelled as Y/C or S-VHS) on the
TV.
B
Connect the audio cables (not supplied)
from the AUDIO OUT sockets on the
recorder to the audio input sockets on
the TV.
Option 3: Using the Video (CVBS)
socket
A
Connect a composite video cable (yellow
- not supplied) from the CVBS OUT
socket on the recorder to the video
input socket (usually labelled as A/V In,
Video In, Composite or Baseband) on the
TV.
B
Connect the audio cables (not supplied)
from the AUDIO OUT sockets on the
recorder to the audio input sockets on
the TV.
(continued)
DIGITAL
HDMI
ANTENNA INPUT
OUT
CVBS-OUT
Y P
B
L
EXT 2
P
R
R
COAXIAL
AUDIO COAXIAL COMPONENT
DIGITAL
S-VIDEO
OUT DIGITAL OUT VIDEO OUT
OUT IN
OR
Option 2
TV