Pvr/T.shift - Hisense 43M3000 User Manual

1.5

PVR/T.Shift

PVR
The PVR function allows you to easily record digital television content for later viewing. The function is only
available in DTV source only. The format of the storage disk must be either FAT32 or NTFS. The PVR will not
function if a data storage device has not been connected.
There are three options for recording, the first option is to use Electronic Program Guide (EPG), the second
option is to press the [
Press the [■] button to stop recording and a *.PVR file will be saved. The files can be played back in the
Media Player.
T.Shift
This option allows you to pause and rewind live TV. This function operates by recording temporarily to a
storage device. Please ensure your storage device is connected and there is enough free disk space (1GB).
Otherwise the recording will not commence.
Press the [ ] button on the remote control to select T.Shift and then the menu will appear, press the [II]
button to pause the live broadcast and press the [
and press the [ ] button to watch advance playback rapidly. Press the [■] button to exit the function and
watch the current broadcast.
NOTES
When connecting external hard disk drives please use an external power supply where possible.
Exceeding a total current consumption may result in damage. The maximum current consumption of
USB3.0 is 1A and The maximum of USB1.1 and USB2.0 are 500mA.
The USB port supports a voltage of 5V.
The maximum supported storage space of the hard disk is 1TB.
If you want to store the video streaming of a DTV program, the transfer rate of the hard disk must not be
less than 5MB/s.
The PVR function is not supported for analogue channels.
The PVR functions are disabled for channels locked with Channel Lock or scrambled channels (CI module
or password needed).
Shortcuts Instructions
] button to select PVR or T.Shift, and the third option is to press the [PVR] button.
] button to play. Press the [
12
] button to watch reverse