Setting The Setup Lock - Denon AVR-2106 Operating Instructions Manual

Advanced Setup – Part 1
Setting the Power Amp Assign.
Make this setting to switch the power amplifier for the surround
back channel to Bi-Amp.
1 CURSOR D D H H
Press the or
"Power Amp Assign." at the "Option Setup"
ENTER
menu, then press the button.
• The "Power Amp Assign." screen appears.
2
CURSOR F F G G
Press the or button to select the
Amp Assign mode according to the speaker
system you want to set up.
3
ENTER
Press the button to enter the setting.
• The "Option Setup" menu appears.

Setting the Setup Lock

The system setup settings can be locked so that they cannot be
changed easily.
1
button to select Press the
"Setup Lock" at the "Option Setup" menu, then
press the
• The "Setup Lock" screen appears.
2
Press the
lock the system setup settings.
3
Press the
and exit the system setup mode.
• When the setup lock function is activated, the settings listed
below cannot be changed, and "SETUP LOCKED" is displayed
when related buttons are operated.
• System setup settings
• Surround parameter settings
• Tone control settings
• Channel level settings (including test tones)
• To unlock, press the SETUP button again and display the "Setup
Lock" screen, then select "OFF" and press the ENTER button.
• System setup is complete. Once these settings are made,
there is no need to change them unless different AV
components are connected or the speakers are repositioned.
CURSOR D D H H
or button to select
ENTER
button.
CURSOR F F
button to select "ON" to
ENTER
button to finalize the setting
40
ENGLISH
ENGLISH
Advanced Setup – Part 1