Table of Contents
Advertisement
Action Messages, Supervisory
"Supv. Alarm in"
Action Messages, Security Alarm
"Security Alarm in"
Action Messages, Pre Alarm
"Ver. Seq. in"
"Post Al. Seq. in"
"Pre-Alarm in"
Action Messages, Fault
"Node Communication Failure"
"Node X Communication Failure"
"Node X Communication Restored"
"Primary Bus Error"
"Secondry Bus Error"
"Printer fault"
"Alarm Tested in"
"AtoD Malfunction"
"LCD Malfunction"
"System In Walk Test"
"System Out Of Walk Test"
"System l/Os By Passed"
"All By Passed I/Os Cleared"
"1/0 Bypassed,"
"Remote Annunciators Not Responding"
"Remote Annunciators OK"
"Key Stuck in"
"Display Missing for"
"Bad Card @ "
"Card Missing @
"New Card Detected @ "
"Out of Memory Assigning"
"I/O Restored,"
"Trouble Tested in"
"Trouble in"
Technical Manuals Online! - http://www.tech-man.com
Description
The "Supv. Alarm in" message is followed by CKT
followed by the "circuit number" (1-128). If also an
addressable CICT this will be followed by DEV
and the "device number" (l-126) See Examples
Description
The "Security Alarm in" message is followed by
CKT followed by the "circuit number" (1-128). If
also an addressable CKT this will be followed by
DEV and the "device number" (1-126) See
Examples
Description
Description
Node lost communications with the Master
Node 0, Master lost communications with Node X
Node 0, Master restored communications with
Node X
Break or short in the primary class A cable
Break or short in the secondary class A cable
Node 0, Master printer error
Message during walk test
System Problem
System Problem
Start partial or Full system walk test mode
Finished system walk test mode
bypass system circuits or devices
System not bypassed
Starts ID of Circuit or point bypassed
System Problem
System Problem Restored
System Problem
System Problem
System Problem
System Problem
System Problem
System Problem
Supervisory or trouble in circuit that automatically
restore themselves will start with this message with
IN CKT followed by the "circuit number" (1-128).
If also an addressable CKT this will be followed by
DEV and the "device number" ( I -126) See
Examples
System Problem
System Problem
16
Hide quick links:
Advertisement
Table of Contents
