Gamewell IF600 Installation & Operation Manual page 19

NODE NUMBER:
The Node Number Section will show the number (address) of the FACP where the message
originated. Node 0 messages originate from the Network Master computer.
When "Heartbeat" is enabled in the PRIV.INI file, a Node 0 message will be generated every two
(2) minutes so the attached equipment can detect that communications with the Master are still
active
NODE NUMBER
STATUS
ACTION
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
STATUS:
The status section
followed by either Alarm, Fault, Normal., Bus, Comm, or Control.
NODE NUMBER
STATUS
ACTION
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
NUMBER OF ALARMS
The number of alarms will be a running count of alarms generated. In an example the first alarm
generated will display 1st of 1 the second alarm would generate 2nd, and the third 3rd, and so
on.
NODE NUMBER
STATUS
ACTION
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
Technical Manuals Online! - http://www.tech-man.com
NUMBER OF ALARMS
CIRCUIT NUMBER
NODE NAME
will display the condition of the reporting Node. The word Status: will be
NUMBER OF ALARMS
CIRCUIT NUMBER
NODE NAME
NUMBER OF ALARMS
CIRCUIT NUMBER
NODE NAME
DATE & TIME
DEVICE NUMBER
DATE & TIME
DEVICE NUMBER
DATE & TIME
DEVICE NUMBER
14