Troubleshooting And Maintenance; Troubleshooting; Maintenance - Siemens CCAW1417-LPO Configuration Manual

10

Troubleshooting and maintenance

10.1

Troubleshooting

10.2

Maintenance

Siemens AG
If problems occur, check to ensure the camera is installed in accordance with the
instructions in this manual. Isolate the problem to a specific piece of equipment in
the system and refer to the equipment manual for further information.
PROBLEM
Nothing appears on the screen.
The image on the screen is too dark.
The camera is not working properly and
the surface of the camera case is hot.
The contrast on the screen is too weak.
Preventive maintenance allows minor faults to be detected and corrected before
they become serious and cause equipment failure. Therefore, the following
maintenance tasks should be performed on a three-monthly basis:
Inspect all connection cables for deterioration or other damage.
Clean all components with a soft, clean cloth.
Check that all fixings are secure.
Troubleshooting and maintenance
POSSIBLE SOLUTION
Are all cables between the camera and the monitor
connected properly?
Is the lens dirty?
If so, clean the lens with a soft, clean cloth.
Is the camera connected to the proper power source?
Adjust the contrast feature of the monitor. Is the camera
exposed to strong light? If so, change the camera
position.
31
03.2011