Wb (White Balance) - Siemens CCAW1417-LPO Configuration Manual

Camera settings
9.2.2

WB (White Balance)

26
Siemens AG
SET PRESET Select zoom position of zoom preset
TOUR CONFIG Select ENTER to save the tour configuration (preset combination)
HOME PRESET Home preset on/off
HOME WAIT Waiting time after which the camera returns to start position (HOME PRESET)
END Back to the next higher menu level
Move the cursor using the "Far/Near", "Tele/Wide" keys.
Press MENU to enter the next level for configuration.
1 2
<TOUR CONFIG MENU>
01* 02* 03 04 05
06 07 08 09 10
< S
DWELL TIME 010
When ZOOM PRESET is selected, you can adjust the preset zoom location using the "tele" and "wide"
buttons.
When a ZOOM PRESET has been selected press the MENU button to save the preset.
<WB MENU>
MODE
R GAIN
B GAIN
FRAME ADJ
END
MODE WB modes:
AWB: Auto White Balance: 2500K – 9500K
WAWB: Wide Auto White Balance: 1800K – 10500K
INDOOR: Indoor white balance mode
OUTDOOR: Outdoor white balance mode
MANUAL: You can change R and B gain manually
CRS (Colour Rolling Suppression): Decrease colour rolling effect; useful in
SHUTTER mode in AE menu
R GAIN Adjust red gain: 0 – 255
B GAIN Adjust blue gain: 0 – 255
FRAME ADJ Since the colour rolling path differs depending on the fluorescent lamp used, it
has to be adjusted individually. To do so, select the WB menu.
After about 10 s, the adjust mode will be finished automatically.
END Back to the next higher menu level
CMD description
* : User-saved preset
< : Deletes the character at the cursor position and
moves one position to the left
S : Save the present tour setting
E
E : Exit
DWELL TIME
Zoom preset dwell time (10 – 180 s)
03.2011