Hobby Van Vantana 2016 Manual page 73

72 7. Electrical Installations
TFT-Controlpanel
Functions of the main switch
• Once the system is in operation, press the main switch briefly
to turn all of the lights and the water supply off. All 12V steady
electrical devices (e.g. refrigerator control, 12V sockets, USB
charging sockets and the heating) will remain activated.
If the vehicle's motor is running, the refrigerator will operate
automatically on 12V, i.e. it is not necessary to press the main
switch. In this case, the selector switch for the refrigerator must
be set to 12V operation. All other 12V electrical devices will
only operate on the ancillary battery if the main switch has
been activated.
Lighting in the
seating arrange-
ment
• Briefly press the key to switch each lamp on and off. Press
longer on the key to regulate how brightly you want the
lights to shine. The brightness you set will be saved; when
the lights are switched on again, the brightness you origi-
nally set will also be switched on again. If the system's
power supply is interrupted, the wall light will shine full
strength the first time you switch it on.
The wall lamps themselves must be switched on before they
can be controlled by means of the control panel.
Ceiling Lamp