Webasto Auxiliary Heating - Hobby Van Vantana 2016 Manual

150 10. Built-in devices
Control panel for preselection timer

10.3 Webasto auxiliary heating

• Set the heating in the vehicle to "warm" before swit-
ching on the heating device.
• Set the vehicle's heater fan to the lowest possible level
when the heating is in continuous operation. This gua-
rantees an optimally regulated current supply.
• To heat the vehicle quickly, set the fan to a higher level.
Toggle switch motor/cabin
Control
switches on
- The heating device will also heat the vehicle's motor. It is also
dashboard
possible to heat the superstructure.
- Heating is limited to a maximum of 60/120 minutes (if the
Toggle switch
preselection timer is used: always 60 minutes; if the telestart
function is used: select from 10-120 minutes).
- The heating device will predominately heat the front area of
the vehicle.
- Duration of heating time: unlimited, irrespective of control panel.
This enables the heating system to remain in continuous opera-
tion, as is customary in a van.
Motor icon pressed:
Cabin icon pressed:
In general, the heating system may also be used while
driving, e.g. to supplement the heating for the motor,
which may not be sufficient.
Before leaving the van, check whether the heating system
should continue to operate while the vehicle is empty. If not,
the heating system must be turned off manually.