Kenmore W10680133C Use & Care Manual page 7

CYCLE GUIDE - TIMED CYCLES
TIMED CYCLES- Will
run the dryer for the specified time on the control.
Settings shown and options in bold are default settings for that cycle.
Any load Timed Dry 40 Wrinkle Guard TM_ Select a drying temperature based on the fabrics in your
Cycle Signal load. Jf you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
Any load Touch Up 20 Wrinkle Guard TM_ Use this cycle to quickly refresh an item or remove light
Cycle Signal wrinkles. The load is cooled slowly to reduce wrinkling and
make it easier to handle.
Small loads and I Express 15 Wrinkle Guard TM_ For small loads of 2-3 items.
sportswear (2 to I Cycle Signal
3 items)
_DependJng on settings, steam option may be disabled to protect clothing and optimize performance.
CYCLE GUIDE - STEAM CYCLE
STEAM CYCLE
- Designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Settings shown and options in bold are default settings for that cycle.
Not all settings and options are avaJlabJe on each cycle.
Mixed loads Steam
Refresh
Air Medium High
N/A
Wrinkle Guard TM
Cycle Signal
Use to smooth out wrinkles and reduce
odors from loads consisting of 2 to 4
dry items of wrinkle-free cotton, cotton-
polyester blend, common knits, and
synthetic garments.
Setting the Dry Ternp
Select a drying temperature based on the fabrics in your load.
If you are unsure of the temperature to select for a load, select
the lower setting rather than the higher setting.
Temperature Tips
[] A High heat setting may be used for drying heavyweight
items such as towels and work clothes.
[] A Medium to Medium High heat setting may be used
for drying medium-weight items such as sheets, blouses,
dresses, underwear, permanent press fabrics, and some
knits.
[] A Low heat setting may be used for drying lightweight
items such as lingerie.
[] Use an Air (no heat) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
[] Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.