Sharp LC-32GD8EE Service Manual page 36

LC-26GA5E
LC-32/37GD8E/RU
LC-32GA5E
LC-32/37BT8E/RU
Digital Board Software Updating , Jig RS-232 (continued)
Then, data transfer from PC to TV set fi nishes when the "Upload progress completed" label appears in the
"Winupload" screen. Now, the TV set made some additional verifi cation (Items #2 to #7). When the full
uploading process is fi nished, in the "Winupload" window appears the label "Preparing to start application" for
a new TV Set, and just now, in the TV screen of the updated set, appears a congratulations label (Item #8).
PC SCREEN PROGRESS
1
2
3
4
5
6
7
8
Note: Do not turn off the TV set while the software updating was in progress.
7. Unplug the AC cord.
8. Disconnect the Jig from TV Set.
• Software Version verifi cation procedure.
1. Connect the AC cord and Switch On the TV Set.
2. Select DTV Menu on TV Set. The following On Screen Display will appear.
3. Select "Version". The updated version can be verifi ed.
Note: Consider the version shown above just as example, may be is not the latest one, and could be
different depending on the TV set destination (market/Country) or model.
TV SCREEN PROGRESS
1
3 & 5
7
36
2
4 & 6
8