Sharp LC-32GD8EE Service Manual page 28

LC-26GA5E
LC-32/37GD8E/RU
LC-32GA5E
LC-32/37BT8E/RU
LC-26P55E
LC-26GA5E
LC-32P55E
VCTp Software Updating, Tera Term (continued)
LC-32GA5E
LC-37P55E
5. Select follows settings:
Serial port to use: COM x
Baud rate:
Data:
Parity:
Stop:
Flow control:
Enter O.K.
6. Check the connection between TV set and PC, sending a wrong command, as for example: "aaa". TV set returns
an "err" label as an syntaxes ERROR (Not correct order or sequence).
Send a "DWMD" (capital letters) command to enter TV set in Download Mode.
Change a baud rate to 115200.
Select: Setup ⇒ Baud rate ⇒ 115200 ⇒ O.K.
7. Select: File ⇒ Transfer ⇒ XMODEM ⇒ Sent
9600
8 bits
none
1 bit
none
28
30