Tuff stuff MSL-IV Assembly & Instruction Manual page 5

FIG. 9 Secure the Top Pulley Assembly (#5)
Upright (#3) using two Hex Head Cap Screws 3/8-16 X 4 1/4
(#99) four Flat Washers SAE 3/8 (#90) and two Nylon Insert
Lock Nuts 3/8-16 (#86). Next, secure the
Assembly (#5) onto the
Head Cap Screw 3/8-16 X 3 (#94), two Flat Washers SAE 3/8
(#90) and one Nylon Insert Jam Lock Nut 3/8-16 (#86). Note:
This bolt should be placed in the top hole of the
(#4).
FIG. 11 Attach the Pec Dec Arm (#7)
Cam Support (#13) and secure it using one Hex Head Cap
Screw 1/2-13 X 3 (#98), two Flat Washers SAE 1/2 (#89) and
one Nylon Insert Jam Lock Nut 1/2-13 (#88). Repeat this
procedure for the opposite Pec Dec Arm Assembly. Note: It is
recommended that the axle on the
lubricated with grease prior to assembly.
MSL-IV Muscle IV Home Gym
to the
Top Pulley
Rear Upright (#4) using one Hex
Rear Upright
to the Pec Dec Arm/
Pec Dec Arm (#7)
FIG. 10
Front
Rear Upright
Cap Screw 3/8-16 X 3 1/2 (#8), two Flat Washers SAE 3/8
(#90) and one Nylon Insert Jam Lock Nut 3/8-16 (#86). Note:
This bolt should be placed in the top hole of the
Housing
X 3 (#94), two Flat Washers SAE 3/8 (#90) and one Nylon
Insert Jam Lock Nut 3/8-16 (#86) through the lower hole of the
Pec Dec Housing
(#62) and two Plastic Insert Caps 2 Sq. (#64), as shown
above.
FIG. 12
Fig.11 to the
Note: It is recommended that the
axles be lubricated with grease prior to assembly. Next, mount
the two Pec Dec Cams (#9)
Housing
be
Owners' Manual: Assembly Instructions
Next, attach the Pec Dec Housing (#18)
(#4). secure this assembly using one Hex Head
(#18). Next, install one Hex Head Cap Screw 3/8-16
(#18). Finally, install the
Mount the assembled
Pec Dec Housing (#18)
onto the the axles of the
(#18), as shown above.
to the
Pec Dec
Rubber Stopper
Pec Dec Arms (#7) in
axles, as illustrated.
Pec Dec Housing (#18)
Pec Dec
4