Tuff stuff MSL-IV Assembly & Instruction Manual page 2

A
bout the Muscle IV Home Gym (MSL-IV).
Congratulations on your new purchase of the Muscle IV
Home Gym (MSL-IV). This gym is capable of a variety of
different exercises, as well as, smooth and user-friendly
adjustment features. In addition, this gym has been
designed to meet the needs and performance requirements
or a suitable home exercise machine. We hope you are
completely satisfied with this product and wish you many
years of enjoyment.
T
uff Stuff Equipment
Every Tuffstuff product has been built to precise quality
tandards and has been carefully packaged to ensure that
damage will not occur during shipment. The limited lifetime
warranty and signature indicating final inspection which was
conducted by our line foreman, is an expression of our
confidence in the completeness, the materials, and
workmanship of this product.
W
arranty
SEE WARRANTY REGISTRATION CARD
R
egistration Card
To avoid unnecessary delays in warranty parts and to
nsure that a permanent record of your purchase is on file
with our factory, be sure to complete the warranty
egistration card and send it to Task Industries today.
S
afety Information
) Familiarize yourself and others with the proper operation
and workout recommendations for each piece of Tuff Stuff
equipment prior to use.
2) Consult with your physician before beginning any
exercise program.
3) Use proper discretion when children are present.
4) Frayed or worn cables can be dangerous and may cause
njury. Periodically check these cables for any indication of
wear.
5) Inspect machine for any sign of parts or hardware
becoming loose.
6) Keep hands and limbs clear from weight stack and all
other moving parts.
1
Introduction
M
aintenance Information
1) Lubrication of all moving parts is essential to the longevity
and optimal performance of your Muscle IV Home Gym.
Initial lubrication of some parts of your gym have been done
at the factory, but the weight stack guide rods must be
lubricated at the time of assembly. We recommend a clear
aerosol, silicone or Teflon spray.
Note: Do not use oil based lubricants as they will attract
dust,dirt, and grime and will eventually gum up and erode
bushings and sealed bearings.
2) All pulleys and bushings should be checked regularly for
signs of wear.
3) Check and adjust tension on cables periodically as it will
maintain proper anatomical function.
4) Periodically check all moving parts, upholstery and grips
for wear. If replacement is necessary, please contact your
local Tuff Stuff retailer or call our Customer Service
Department.
5) As needed, upholstery may be cleaned with a mild
solution of soap and water. Regular use of a vinyl treatment
will add to the life and appearance of your upholstery.
6) All chrome plated surfaces should be cleaned regularly to
prolong the life and luster of the finish. Wipe machine down
with a damp cloth and dry thoroughly each day. At least
once a week your chrome equipment should be polished
with a commercial grade or automotive type chrome polish.
T
ool Requirements
1) Two 3/4" Open-end wrenches
2) Two 9/16" Open-end wrenches
3) One rubber mallet
4) Needle nose pliers
5) One can Silicone Spray/ Teflon Spray Lubricant
6) Snap ring pliers
7) Hex Key 3/16" (Supplied)
7) Windex or household glass cleaner
Hardware Measurement Diagram
MSL-IV Muscle IV Home Gym