Basic Playback; Playing Dvd-Video/Audio, Video Cd, And Cd - Onkyo DVD Audio/Video Player DV-S939 Instruction Manual

Playing DVD-Video/Audio,
Video CD, and CD
Before playing
• DVD-Video, DVD-Audio, Video CD, CD, CD-R and CD-RW can be played with the DVD Player (see
"Playable Discs" on page 6). Do not play anything else.
• When playing DVD-Video, Video CD, or DVD-Audio with video features, turn on the TV and set the TV
to the DVD Player's input.
• If an audio system is connected to the DVD Player, turn on the audio system and set it to the DVD
Player's input.
VCD
DVD-V DVD-A
About the , ,
DVD-A means the function or title is related to DVD-Audio operation.
DVD-V means the function or title is related to DVD-Video operation.
means the function or title is related to Video CD operation.
VCD
CD means the function or title is related to audio CD operation.
DVD-V DVD-A VCD CD

Basic Playback

1
Press
The disc tray opens.
2
Place a disc on the disc tray.
Put the disc in the tray with the label
side facing up.
There are two different disc sizes.
Place the disc in the correct guide on
the disc tray.
S TA N D B Y / O N
STANDBY
POWER
ON OFF
3
Press
The disc tray closes and playback starts.
If you press to close the tray after step 2, playback
may automatically start depending on the disc.
The appropriate disc indicator lights, and the audio
sampling rate indicator lights.
For the other information that appears in the display,
see page 35.
20
CD
and marks in the pages related to disc operation
If the DVD Player is in standby mode
.
when the button is pressed
The DVD Player turns on and the disc tray opens.
In this case, it takes several seconds until the disc
tray opens.
VIDEO CIRCUIT
OFF
.
V I D E O C I R C U I T
O F F
DISPLAY
OPEN/CLOSE
48/44.1 96/88.2 192/176.4
48/44.1 96/88.2 192/176.4
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Warning
If the DVD Player is connected to the TV or
amplifier through the analog audio jacks, do not
play DTS-encoded discs. Excessive noise may
be output from the analog stereo jacks, which
may damage the connected equipment.
To reproduce DTS surround sounds, digital
connection to an amplifier with a DTS decoder
is needed.
Whenever a disc is loaded in the
player, indicators above
light up.
DISPLAY
OPEN/CLOSE STOP PLAY
DVD
48/44.1 96/88.2 192/176.4
and