Selecting The Audio Language - Onkyo DVD Audio/Video Player DV-S939 Instruction Manual

Selecting the Audio Language

Good morning!
You can select a preferred audio language and sound system.
DVD-V DVD-A
Selecting a Playback Audio Setting
You can select the preferred audio language and sound system as a
set from those included on the disc. This function lets you
temporarily change the audio language which you selected as the
automatic setting in the setting menu (see pages 44 and 50), and
choose the sound system if the disc is recorded in more than one
sound format.
1
Press AUDIO during playback.
DVD-V
e.g.
Audio:
Audio OUT Select : Bitstream
The abbreviation of the language appears.
Refer to the list of languages on page 55.
Press AUDIO or
setting is displayed on the TV
2
screen.
Each time you press AUDIO or
language and audio recording system set
changes.
e.g.
DVD-V
: Cycles backwards
To turn off the audio setting display
Press CLEAR.
Notes
• Dolby Digital 5.1 Channel sound may be
displayed as "
• You can change the "Audio Out Select" setting
temporarily by pressing
• When using a DVD-Audio, it may not be possible
to change the "Audio Out Select" setting.
• Before changing the setting, read through the
explanation on "Audio Out Select" on page 48
and carefully select the setting.
34
Bon jour! ¡Buenos días!
Audio language
Sound system
Audio channel
1 ENG PCM 2CH
Audio Out Select
(see page 48)
while the audio
, the
A u d i o : 1 ENG 5.1CH
A u d i o : 2 ENG PCM 2CH
A u d i o : 3 FRE 5.1CH
D 6CH".
/ .
AUDIO
MENU
ENTER
Notes
• Depending on the disc, it may be necessary to select the audio sound
track using the DVD menu. When this is the case, press MENU to open
the DVD menu and select the appropriate sound track as indicated on the
DVD menu screen.
• When the DVD Player is turned on or when the disc is changed, the
audio settings are restored to the presets. In some cases, a language
recorded on the disc may be given priority and selected automatically
when the disc is loaded regardless of the setting.
• Depending on the DVD-Audio, the sampling frequency and bitrate may
be displayed.
• When using a DVD-Audio, changing the audio sound track may cause
playback to start again from the beginning of the current track.
VCD
Selecting Sound Channels on Video
CD
A Video CD may have left and right sound channels which contain
sounds or languages on each channel. You can switch these two
channels to hear a preferred sound or language.
During playback, press AUDIO
(repeatedly) to select the sound
channel.
L . R
L
R
Both the left and right
channels are heard.
The left channel is heard.
The right channel is heard.