Key Descriptions; M3901 Key Descriptions - Nortel M3110 Installation Manual

Key descriptions

M3901 key descriptions

Table 24
M3901 key description
Key Number
Key 0
Key 1
Key 2
Key 3
Key 4
Key 5
Note: The system administrator can configure Keys 1 - 5 with any feature that does not require
a display (DAG, DWG, DSP, and RMK).
Note: Nortel recommends that the M3901 is not configured as an ACD DN.
This section provides key description and key configuration information for
each model of the M3900 series. This section also shows the physical
placement of the keys on each model: M3901, M3902, M3903, M3904, and
M3905.
Table 24 gives a description of the keys on the M3901. Figure 31 on
shows the physical placement of the keys on the M3901.
Description
Line (Directory Number)
Note: The system administrator can configure Key 0 as a Voice Call
(VCC), HotLine (HOT) Key, Single Call Non-ringing (SCN), Multiple Call
Ringing (MCR), Multiple Call Non-ringing (MCN), Private Line Ringing
(PLR), or Private Line Non-ringing (PLN).
Feature or Auto Dial
Feature or Auto Dial
Feature or Auto Dial
Feature or Auto Dial
Feature or Auto Dial
Telephones and Consoles
M 3900 description
Description, Installation, and Operation
Page 159 of 504
page 160