Setting The Unit; Power Indicator; Top Cover; Cut Off Frequency Control - Pioneer PRS-D420 Owner's Manual

Setting the Unit

• To adjust the switch, use standard tip screwdriver if needed.

Power Indicator

The power indicator lights
when the power is switched
on.

Cut Off Frequency Control

If the LPF/HPF select switch is set to
LPF or HPF, you can select a cut off
frequency from 40 Hz to 500 Hz.
3

Top Cover

Before setting up the unit, unfasten
the screws with a 4 mm hexagonal
wrench and remove the top cover.
BFC (Beat Frequency Control)
Switch
BFC switch is on the bottom of the unit.
If you hear a beat while listening to an
MW/LW broadcast with your car stereo,
change the BFC switch using a small
standard tip screwdriver.