Table of Contents
Advertisement
Available languages
Available languages
it en
outlet when not in use, before
putting on or taking off parts, and
before cleaning. To disconnect,
turn unit off, grasp plug, and pull
out from wall outlet. Never yank
on cord.
• Do not operate any appliance
with a damaged cord or plug or
after the appliance malfunctions
or has been damaged in any
manner. Return the appliance to
an authorized service facility for
examination, repair, or electrical
or mechanical adjustment.
• Do not leave the appliance unat-
tended while it is running.
•
After use, get hold of the plug to disconnect it
from the electrical outlet and wind the power
cord.
•
Do not bend the power cord and keep it away
from sharp edges to avoid any damage.
•
Never leave or use the appliance over or close
to flames, ovens, flammable materials or other
sources of heat.
•
Do not use the upright vacuum cleaner on
persons or animals. Keep the suction ends away
from your body while it is in operation.
•
Should you suspect a failure, immediately unplug
it from the electrical outlet.
•
Never immerse the upright vacuum cleaner in
water or any other liquid. Never spray any liquid
substances onto the appliance.
•
Do not leave the appliance in the open air and
exposed to inclement weather conditions.
•
never suck up any liquid or humid
substances as this could affect the
operation of the appliance.
•
Never suck up any flammable materials or
incandescent objects such as ash, cigarette
ends etc. Some parts of the upright vacuum
cleaner could catch fire.
•
Never suck up any sharp or cutting objects as
this could damage the appliance.
•
For your safety, all repairs or maintenance
operations on the appliance must be carried
out exclusively by Hotpoint-Ariston's authorised
staff.
12
•
The manufacturer shall assume no responsibility
in case of damage resulting from any improper
use of the appliance.
BEForE UsE
Remove all adhesives, protective plastic materials
and cardboard packaging. Make sure all adhesive
parts are removed with a soft damp cloth.
Assembling (A)
Assemble the Compact Power as follows:
1.
Fit the hand grip (12) to the body of the upright
vacuum cleaner (10).
2.
Place the lower cord-rewinding support (15) into
its housing, making sure its insertion is complete.
3.
Insert the clamp screw and fasten it securely.
4.
Fit the parking brush (3) or the attachment you
need (see chapter "Attachments") into the end of
the suction inlet (5) until it locks into place.
UsInG THE UprIGHT VACUUM
ClEAnEr (B)
Do not use the upright vacuum cleaner
without filter or dust bag because the
appliance could get damaged.
1.
Unwind the power cord (16) and plug the
appliance into an electrical outlet (220
Before you plug the appliance into an
electrical outlet, we recommend unwinding
the entire power cord (6,3 m) to avoid any
overheating and damage.
2.
Rotate the switch-on/power electronic control
(11) clockwise to start the appliance.
3.
To select the desired suction intensity, rotate
the switch-on/power electronic control as far as
position +.
We recommend using a low suction power
on delicate surfaces to avoid any damage
(e.g. curtains, fabrics, cushions etc).
4.
To switch off the appliance rotate the switch-on/
power electronic control to the Off position.
5.
Unplug it from the electrical outlet and rewind
the cord around the lower (15) and upper (14)
supports.
6.
Park the upright vacuum cleaner in a vertical
position or secure it to a wall using the special
240V).
-
Advertisement
Table of Contents
