Hitachi 32HLX61 Operating Manual page 89

RGB ON SCREEN DISPLAY
AUTO ADJUST
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Move SEL Select
NOTES: • Press SELECT to AUTO ADJUST the RGB mode.
• The other functions do not operate while AUTO ADJUST is in progress.
• Allow the LCD TV to warm up for 20 minutes before performing AUTO ADJUST.
• Select a bright image for display while AUTO ADJUST takes place.
• If AUTO ADJUST terminates unsuccessfully, try AUTO ADJUST again. If AUTO ADJUST fails several times in
succession, try using manual adjustment to adjust Vertical Frequency, Aspect Ratio, Timing Frequency and Picture.
• Always reset AUTO ADJUST when setting new display setting or when changing to a new
H POSITION
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Move SEL Select
V POSITION
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Input Level
Black Side Panel
Move SEL Select
Downloaded from www.Manualslib.com
HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK and CLOCK PHASE
for current RGB format are adjusted automatically.
•Press the MENU button in RGB mode.
•Use the CURSOR PAD
•Press SELECT or CURSOR PAD
Adjust
0
0
0
0
Reset
0.7V
Off
This feature allows you to adjust the horizontal position of the display.
Adjust
0
0
0
0
Reset
0.7V
Off
This feature allows you to adjust the vertical position in RGB mode.
Adjust
0
0
0
0
Reset
0.7V
Off
manuals search engine
or to select AUTO ADJUST.
to access AUTO ADJUST menu.
Use CURSOR PAD or
Press SELECT to select AUTO ADJUST.
Use CURSOR PAD and
Press the MENU button to return to RGB Mode menu.
Press EXIT to quit.
Use CURSOR PAD and
Press MENU button to return to RGB Mode menu.
Press EXIT to quit.
89
cursors to highlight adjust.
to adjust the horizontal position.
to adjust the vertical position.