Table of Contents
Advertisement
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER
1.
Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the AVC
Center below.
2.
Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3.
Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4.
Press the INPUTS button, then select INPUT 3 from the INPUTS menu to view the program from the VCR or laserdisc player.
The VIDEO label disappears automatically after approximately four seconds.
5.
Select ANT A or B from the INPUTS menu to return to the previous channel.
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
NOTES:
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output
(INPUT: 4 in example on page 27). Refer to your VCR operating guide for more information on line input-output
connections.
Downloaded from
www.Manualslib.com
manuals search engine
R
L
V
OUTPUT
VCR
17
Back of
VCR
Advertisement
Table of Contents
