Table of Contents
Advertisement
Video 2 Auto Link
Setup
Set The Inputs
Video1
Video2
Video3
Video4
Video5
Video Power Save
Move
Use CURSOR PAD
When AUTO is selected, the TV will turn on and switch to Video2 automatically, when the Video2 input device is turned on. This is
convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
When REMOTE is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on (VCR,
laserdisc, or DVD) and any of the buttons on your remote control is pressed.
Select Off to disable this function.
Press EXIT to quit the menu or select SET THE INPUTS to return to the previous menu.
1.
Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To
NOTES:
do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described
above.
2.
When using REMOTE mode, any remote control button will substitute for your video input device play button.
However, intended operation is for use with your VCR, laserdisc, or DVD play button.
3.
If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after
three hours.
Set Black Side Panel
Setup
Menu Preference
Screen Saver
Set The Inputs
Set Black Side Panel
Set Closed Captions
Set Monitor Out
Move
Press the CURSOR PAD
Press EXIT to quit menu or select SET BLACK SIDE PANEL to return to the previous menu.
NOTES:
1. To prevent screen burn when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is recommended to watch 4:3
signal with gray side bar.
2. Depending on received signals, some images and Closed Caption displays may be missing when the Black Side
Panel is set to Auto 1 or Auto 2.
Downloaded from
www.Manualslib.com
Use this function to automatically turn the TV on and tune to Video 2 when it detects a video signal to
input 2.
Rename List
AVR
DVD
PVR
STB2
CAM
DVD2
PVR2
VCR
CBL
DVD3
SAT
VCR2
CBL2
LD
STB
VCR3
Reset
Auto Link
Auto
Remote
Off
Return
SEL
,
,
and
then press the SELECT button to change AUTO LINK setting.
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in
Standard mode.
Select
SEL
or
to set to ON or OFF.
Setting
Signal
NTSC/480i/480p
Aspect: 4:3 standard
1080i (4x3 source)
Aspect: 16:9 standard
1080i (4x3 source with
logo on corner
Aspect: 16:9 standard
manuals search engine
Setup
Set The Inputs
Video1
Video2
Video3
Video4
Video5
Video Power Save
Move
SEL
Set Black Side Panel
or
Next/Prev
Off
On
Auto 1 Auto 2
Gray
Black
Gray
Gray
Black Black
Gray
Gray
Black Black
Black
Gray
78
Rename List
AVR
DVD
PVR
STB2
CAM
DVD2
PVR2
VCR
CBL
DVD3
SAT
VCR2
CBL2
LD
STB
VCR3
Reset
Auto Link
Auto
Remote
Off
Return
Off
On/Off
SEL
Return
Recomended
Aspect
4x3
Expanded
4x3
Expanded
4x3
Expanded
SETUP
Advertisement
Table of Contents
