Table of Contents
Advertisement
4.
Operate DIP switch 1 in the following sequence (you have 15 seconds to
complete the sequence):
•
OFF
•
ON
•
OFF
5.
If everything is OK, the Status LED should flash once after about 5 seconds.
The Level One ISDN Router is now ready for use with the default IP Address
and password.
Specifications
Dimensions
Operating Temperature
Storage Temperature
Network Protocol:
Ethernet Interface:
ISDN Interface:
LEDs
External Power Adapter
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
CE Marking Warning
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
120mm(W) * 93mm(D) * 30mm(H)
0° C to 40° C
-10° C to 70° C
TCP/IP
1 * 10/100BaseT (RJ45)
1 * RJ45 for S/T interface.
2 * RJ45 connection status
2 * Data Transfer
12 V DC
Your Level One ISDN Router
3
Advertisement
Table of Contents
