Table of Contents
Advertisement
Level One ISDN Router
Data LEDs (Front)
Note: The Data/Status LED has 2 colors - Orange and Green.
Data/Status LED
OFF
ON (Orange, then Green)
ON (Green)
Flashing (Green)
Flashing Orange, Green
(repeated)
DIP Switches
SW1
OFF
OFF
ON
ON
Restore Device IP Address and Password
Use the following procedure to:
•
Restore the device IP address to the factory default of 192.168.0.1
•
Set the Network Mask to 255.255.255.0
•
Set the password to NULL (no password)
Procedure:
1.
Power off the Level One ISDN Router.
2.
Set DIP switch 1 to ON, and switch 2 to OFF.
3.
Power on the Level One ISDN Router
2
ISDN Data LED
OFF
ON, then OFF
OFF
Flashing
-
SW2
Description
OFF
Normal operation (default)
ON
DHCP Server disabled.
OFF
Restore device IP and password (see below)
ON
Normal Operation
Description
No power.
Normal power ON (start up)
sequence.
Idle
Normal operation. Data is being
received and transmitted.
Hardware error. Contact
technical support.
Advertisement
Table of Contents
