Regency F3500 Owners & Installation Manual page 2

Pro series freestanding woodstove
Table of Contents

Advertisement

The pride of workmanship that goes into each of our products will give you years of trouble-free enjoyment. Should you have any questions about
your product that are not covered in this manual, please contact the REGENCY DEALER in your area.
"This wood heater has a manufacturer set minimum low burn rate that must not be altered. It is against federal regulations to alter this setting or
otherwise operate this wood heater in a manner inconsistent with operating instructions in this manual." Failure to follow the manual details
can lead to smoke and CO emissions spilling into the home. It is recommended to have monitors in areas that are expected to generate CO
such as heater fueling areas.
"U.S. ENVIRONMENTAL PROTECTION AGENCY Certified to comply with 2020 particulate emission standards using crib wood."
Model Regency F3500 – 1.1 g /hr.
"This manual describes the installation and operation of the Regency F3500 catalytic equipped wood heater. This heater meets the 2020 U.S.
Environmental Protection Agency's crib wood emission limits for wood heaters. Under specific test conditions this heater has been shown to
deliver heat at rates ranging from 10,959 BTU/hr. to 33,352 BTU/hr." Efficiency is determined using the B415 method resulting in lower and higher
heat values. This heater generates the best efficiency when operated using well-seasoned wood and installed in the main living areas where the
majority of the chimney is within the building envelope. "This wood heater contains a catalytic combustor, which needs periodic inspection and
replacement for proper operation.
It is against federal regulation to operate this wood heater in a manner inconsistent with operating instructions in this manual, or if the
catalytic element is deactivated or removed."
CAUTION: BURN UNTREATED WOOD ONLY. OTHER MATERIALS SUCH AS WOOD PRESERVATIVES, METAL FOILS, COAL,
PLASTIC,GARBAGE, SULPHUR OR OIL MAY DAMAGE THE CATALYST
"This heater is designed to burn natural wood only. Higher efficiencies and lower emissions generally result when burning air dried seasoned
hardwoods, as compared to softwoods or to green or freshly cut hardwoods."
DO NOT BURN:
• Treated wood
• Lawn clippings or yard waste
• Coal
• Materials containing rubber including tires
• Garbage
• Materials containing plastic
• Cardboard
• Waste petroleum products , paints or paint thinners or asphalt products
• Solvents
• Materials containing asbestos
• Colored Paper
• Construction or demolition debris
• Trash
• Railroad ties
Burning these materials may result in release of toxic fumes or render the heater ineffective and cause smoke.
The authority having jurisdiction (such as Municipal Building Department, Fire Department, Fire Prevention Bureau, etc.) should be
consulted before installation to determine the need to obtain a permit.
Note: Due to the high efficiency of the F3500 unit. Double wall pipe is recommended from the stove top to either wall or roof exit. A minimum of
36" vertical rise is required prior to using any elbows.
This unit must be connected to either a listed factory built chimney suitable for use with solid fuels and conforming to, ULC629 in Canada or UL-
103HT in the United States of America. or code approved masonry chimney with flue liner.
F3500 is tested and certified to ULC-S627-00 and UL1482-2011.
SAVE THESE INSTRUCTIONS
2
Thank-you for purchasing a
REGENCY FIREPLACE PRODUCT.
• Manure or animal remains
• Saltwater driftwood or other previously salt water
saturated materials
• Unseasoned wood
• Paper products, cardboard, plywood or particle
board. The prohibition against burning these
materials does not prohibit the use of fire starters
made from paper, cardboard, saw dust, wax and
similar substances for the purpose of starting a
fire in a wood heater.
F3500 Regency Freestanding Woodstove

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro seriesF3500b

Table of Contents