72
Chapter 4 Web management interface basics
Setting remote dial-in access security
To set the parameters for remote dial-in access security:
1
From the main menu, select Administration > Security > Radius.
The Radius management page opens
Figure 38 Radius management page
2
Type the IP addresses of the primary and secondary RADIUS (Remote
Authentication Dial In User Services) servers.
3
Type the number of the user datagram protocol (UDP) port for the RADIUS
server. The default value is 1645.
4
Type a character string for the RADIUS Shared Secret. This parameter is a
special switch security code that provides authentication to the RADIUS
server. The value can be any contiguous ASCII string that contains at least
one printable character, up to a maximum of 35.
5
Click Submit.
214392-A
(Figure
38).