Figure 37 Console Password Page; Setting Console, Telnet, And Web Passwords - Nortel BayStack 380-24F Getting Started

Setting console, Telnet, and Web passwords

1
From the main menu, select Administration > Security.
2
On the Security page list, click Console, Telnet, or Web.
The selected password management page opens
Note: The title of the page indicates which type of access you are setting
the password for. In
Administration > Security > Console.

Figure 37 Console password page

3
Choose the type of password:
• None—specifies no password for this type of access
• Local Password—sets a password for access through direct network
connection or a direct Console port connection
• RADIUS Authentication—sets a password for remote dial-in. If you
select this password type, you must also set up RADIUS authentication
from the Radius management page.
4
Type the password for read-only and read/write user access.
5
Click Submit to save the changes.
Getting Started with the BayStack 380-24F Gigabit Switch Management Software
Chapter 4 Web management interface basics
Figure 37, the network administrator selected
(Figure 37).
71