Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
Please read these instructions carefully before use.
Before installation
Do not connect the product to the mains supply before pipes have been routed and the system
interconnected.
The units are heavy and aluminium chips/sharp edges can cause cuts on the hands. Lift with your
legs, not your back. Always wear gloves and eye protection during assembly.
Read all the instructions and assembly instructions before assembly.
Electrical safety
New installation and extensions to existing systems must always be performed by a qualified electrician.
If you have the necessary experience and knowledge, you may replace switches and wall sockets, fit
plugs, extension cords and lamp holders. If not, you should contact an electrician. Improper installation
may result in electric shock or fire.
IMPORTANT!
The system must be connected to an earthed mains supply (230 VAC, 50 Hz, 10 A), with a residual
current device with a maximum tripping current of 30 mA and overvoltage protection.
Never poke your fingers or objects inside the unit when the system is running. Risk of personal
injury and/or damage to property.
Never pour water over the unit. Never cover the unit, partly or fully – risk of overheating.
If the unit stops or shuts down, wait 3 minutes before restarting the unit.
SAFETY INSTRUCTIONS
TECHNICAL DATA
Heat output
Refrigerant, quantity
Power consumption
Fan speed
Water pressure drop
Noise level
Water connection
Net weight
ENGLISH
kW
kg
kW
rpm
kPa
dB(A)
kg
34
4,4
R410A, 0,9 KG
0,8
850
10
55
40 mm
46
Advertisement
Table of Contents
