Install The Connecting Pipe - intensity MDV-V105W/DMN1 Installation Manual

5.2 Installation space
A
F
A
F
B
Table 5-1
MODEL A B C
990 624 354
10.5kW
14kW
940 600 360
16kW
Single unit installation
(Wall or obstacle)
Air inlet
>300
N
Air inlet
M
Parallel connect the front with rear sides
>2000 >500
Installation manual
4
Fig.5-1
Fig.5-2
Fig.5-3
D E H REMARK
F
396 366 1075 966 Fig.5-1
400 376 1020 1245
Fig.5-2
Maintain cha nnel
>600
P
Air outlet
Fig.5-3
>3000 >3000 >300
Fig.5-4
Parallel connect the two units or above
>300
>2000
5.3 Moving and installation
Since the gravity center of the unit is not at its physical
center, so please be careful when lifting it with a sling.
Never hold the inlet of the outdoor unit to prevent it from
deforming.
Do not touch the fan with hands or other objects.
Do not lean it more than 45, and do not lay it sidelong.
Make concrete foundation accoding to the sepecif-ications of
the outdoor units.(refer to Fig.5-4)
Fasten the feet of this unit with bolts firmly to prevent it from
collapsing in case of earthquake or strong wind.(refer to
Fig.5-4)
mm
All the pictures in this manual are for explanation purpose
only. They may be slightly different from the air conditioner
you purchased(depend on model).The actual shape shall
prevail.

6. INSTALL THE CONNECTING PIPE

Check whether the height drop between the indoor unit and
outdoor unit, the length of refrigerant pipe, and the number of
the bends meet the following requirements:
6.1 Refrigerant piping
>600
Fix with bolt
NOTE
Fig.5-5
Fig.5-6
Fig.6-1