Rail Wheel Replacement Steps - TuffStuff CLH-300 Owner's Manual

Rail Wheel Replacement Step 1
NOTE:
1. TWO PEOPLE REQUIRED TO PERFORM THESE STEPS.
Rail Wheel Replacement Step 2
NOTE:
1. HAVE ONE PERSON HOLD THE LINEAR SHAFTS WHILE YOU REMOVE THE REAR STABILIZER
AND THEN SLIDE THE CARRIAGE OUT.
20 www.tuff stuffi tness.com
DISCONNECT THIS END OF THE CABLE
AND PUT ASIDE. (REFER TO PAGE 17)
CAUTION:
PLACE A BLOCK UNDER THE FRAME FOR
SUPPORT BEFORE REMOVING THE REAR
STABILIZER.
CLH-300 Horizontal Plate Load Leg Press/Hack Squat