NetComm T1 User Manual page 20

DHCP (Auto config)
This connection will get the IP address from the Internet service provider. Choose this connection if you are connecting the router to a
Cable Modem service. Leave everything as default unless instructed by your Internet Service Provider.
Name
Hostname
MAC Clone
Click Apply to save the settings.
PPPoE (ADSL)
Most ADSL services use the PPP over Ethernet protocol. Use this if you connect your 3G Router to a bridged ADSL modem.
Name
Username/Password
Operation Mode; There are 3 options:
'Keep Alive'
'On Demand'
'Manual'
MAC Clone
Click Apply to save the settings.
3G Travel Router t1 User Guide
20
Description
Please input the host name of your computer. This is optional, and only required if your service provider asks you to do
so.
Please input the MAC address of your computer here if your service provider only permits computers with a certain
MAC address to access the Internet. If you are using the computer which used to connect to Internet via a cable
modem, you can simply press the 'Default' button to fill the MAC address field with the MAC address of your computer.
Description
Type in your PPPoE account username and password.
Keeps the Internet connection alive, does not disconnect.
Only connects to the Internet when there's a connect attempt
Only connects to the Internet when the 'Connect' button on this page is pressed, and disconnects when the
'Disconnect' button is pressed.
Please input the MAC address of your computer here if your service provider only permits computers with
a certain MAC address to access the Internet. If you are using the computer which used to connect to the
Internet via cable modem, you can simply press the 'Default' button to fill the MAC address field with the MAC
address of your computer.
YMLT1WN
www.netcomm.com.au